Sealers
Color Guard
ColorGuard is a premium-quality, non yellowing, UV-resistant, super-tough acrylic film that is easy to clean and maintain. ColorGuard protects with a high-gloss shine that penetrates the surface to retard efflorescence and resist oil, grease and food stains. ColorGuard virtually eliminates concrete dusting and is tough enough to withstand the extremes of areas subject to freeze-thaw.
Color Guard
Cure Guard
Concrete Color & Design CureGuard Cure & Seal provides an outstanding combination of curing, sealing and dustproofing for freshly finished interior or exterior concrete surfaces. It means ASTM C-309 & ASTM C-1315 specifications as an outstanding curing compound and is an excellent dustproofer and surface sealer. CureGuard will resist many chemicals (except solvents) and helps protect against staining.
Cure Guard
Lifetime
Lifetime Sealant is a penetrating silicone rubber material, designed to give a permanent treatment to wood, concrete, masonry and other porous substrates. Lifetime is not a water repellent. Lifetime’s unique feature is that it actually prevents water from penetrating the surface to which it is applied. Check the video below for further details.
Lifetime
Color Guard Matte
ColorGuard Matte is an acrylic-based, crystal-clear sealer. Formulated and recommended for application to a porous substrate for the primary purpose of preventing the penetration of Water. Non-yellowing, crystal clear, dries in a matte finish, interior/exterior use, enhances color.
Color Guard Matte
Acrylic Urethane
Concrete Solutions Acrylic Urethane is a two component, high performance sealers used for a variety of applications. It has excellent UV resistance and gloss retention for exterior applications and provides a durable, easy to clean, chemical and stain resistant finish. It does not require a primer as with most urethane’s but can be used directly as the first coat and topcoat sealer over regular and polymer modified concrete porous tile, brick and exposed aggregate. It is also compatible to apply over Concrete Solutions WB Epoxy. For stamped concrete applications the Acrylic Urethane can be used in place of the Stamped Concrete Sealer where a more durable, high gloss finish is desired.
Acrylic Urethane
SB Urethane
Concrete Solutions SB Urethane is a two component, high solids, aliphatic polyurethane, formulated as a high performance, VOC compliant topcoat sealer. It can be used for interior and exterior applications and provides a durable, flexible, abrasion resistant finish with excellent resistance to a wide range of chemicals. It is used strictly as a topcoat sealer and should always be applied over the proper prime coat depending on the application. It can be applied over WB epoxy, Epoxy 200, Epoxy 600, Acrylic Urethane and as a topcoat over the Color Flake floors use SB Urethane for the best results. If desired, a special accelerator can be added to the SB Urethane for faster cure time. For most outdoor applications, especially in hot desert climates, use Acrylic Urethane for the best results.
SB Urethane
Epoxy 600
Concrete Solutions Epoxy 600 is a two component, unique, self-leveling epoxy coating designed as a high build, clear or pigmented topcoat for interior floor applications. It can also be used over Concrete Solutions Polymer Concrete 1/4 “Stamping applications (Stamp-Top”) to help fill in some of the stamped texture on interior floor applications where a smoother, easier to clean surface is desired. It is a versatile, high grade epoxy material used for a variety of job applications and provides an attractive gloss appearance. For the best gloss retention and UV stability, it is recommended to apply our Concrete Solutions SB or HP Urethane as a topcoat.
Epoxy 600
WB Epoxy Clear
Concrete Solutions WB Epoxy Clear is a two component waterborne epoxy used in a variety of applications. It has a long pot life of 3 hours and is usually tack free within 1-2 hours. Due to the water permeability and moisture insensitive properties of WB Epoxy Clear, it can be applied over damp surfaces, although all standing water should be removed and the top surface allowed to dry. Moisture vapor testing of the surface is recommended before applying WB Epoxy Clear.
WB Epoxy Clear
WB Urethane
Concrete Solutions WB Urethane is a water-based, high solids, two component aliphatic polyurethane. It provides a high performance clear coating over exterior or interior surfaces. It dries to a hard, durable film that has excellent resistance to impact, abrasion, and weathering. WB Urethane offers substantial performance improvements over first generation catalyzed water-based polyurethanes, including higher film build capabilities, improved chemical resistance and resistance to hot tire staining.
WB Urethane
HP Urethane
Concrete Solutions HP Urethane is a 2:1, high performance, chemically cured aliphatic polyol urethane coating with superior exterior performance. It has excellent gloss and color retention characteristics with no tendency to yellow in sunlight (exterior exposure) or to darken in interior applications. It has superior abrasion and splash resistance to Alkalies (salts), Acids (non-oxidizing) and skydrol (hydraulic fluid), as well as resistance to oils, JP 4 and JP 5 fuel, diesel oil, light fuel oil, lubricating oils and synthetic lubricating products. When a high performance coating is needed, HP Urethane provides an excellent finish coat when it is used over the proper primer depending on the substrate. HP Urethane can be applied over Concrete Solutions WB Epoxy, Epoxy 200, Epoxy 600, and as a topcoat over the Concrete Solutions Color Flake and Tuff-Grit Flooring Systems. Do not apply over Concrete Solutions Stamped Concrete Sealer, Sealcoat 1000 or Concrete Colorcoat. If desired, a special accelerator can be added to the HP Urethane for a faster cure time.
HP Urethane
UV Shield
UV Shield is a two-component, 100% solids hybrid epoxy resin, designed to eliminate the yellowing common to most 100% solids epoxies. Formulated for superior resistance to ultra-violet degradation and excellent resistance to impact and abrasion. Has virtually no odor and can be used as a zero voc alternative to chemical resistant urethane finish coats. Used primarily as a finish coat for quartz and flake decorative flooring systems or as the primary searing surface when applied to primed concrete. Recommended for indoor use only.
UV Shield
SharkGrip
H&C SharkGrip Slip Resisant Additive easily stirs into most oil-based and water-based paints and other coatings, due to its low oil absorption and high solvent resistance. Its low density allows it to stay well suspended in thin materials such as stains and sealers.
SharkGrip